X-TEK ALUMINIUM BACK PLATE

The perfect travel companion. Maximum stability despite low weight. (Picture shows back plate with PURE TEK Harness and shoulder padding)

DSI TECH WING 20 L

tds dsi tech wing 20 liters: Double-bladder all-back stabilizing jacket, Outer bag of CORDURA® 1000, Inner air cell of tear-proof polyurethane, radio frequency welded easily replaceable, Corrugated group with inox elements, Volume: 20 liters, Lift: 180 N (18.35 kg), CE certified according to Norms EN250 and EN1809

SINGLE TANK ALU ADAPTER PIECE + TANK BANDS INOX

Plate for mounting a single bottle on back plate, in polished aluminum. Includes set of two bottle straps with stainless steel buckle. Also includes a complete set of screws with spherical head, square body to avoid turning when tightening, washers and wing nuts. Approximate weight of the set 1 kg

DSI WING 24 L

tds dsi wing 24 liters: Double-bladder all-back stabilizing jacket, Outer bag of CORDURA® 1000, Inner air cell of tear-proof polyurethane, radio frequency welded easily replaceable, Lift: 197 N (20.09 kg), Corrugated group with inox elements, Volume: 24 liters. CE certified according to Norms EN250 and EN1809

SINGLE TANK ADAPTER PIECE

Plate to fitting single tank to back plate. Stainless steel or aluminum models. It also can be used to mount twins with double tank straps (not included). Weights: Stainless steel 0.870 kg

DSI TECH WING 28 L

tds dsi tech wing 28 liters: Double-bladder all-back stabilizing jacket, Outer bag of CORDURA® 1000, Inner air cell of tear-proof polyurethane, radio frequency welded easily replaceable, Lift: 230 N (23,45 kg), Corrugated group with inox elements, Volume: 28 liters. CE certified according to Norms EN250 and EN1809

DSI WING DOUBLE 40 L

tds dsi 40 l wing double bladder: Double-bladder all-back stabilizing jacket, Outer bag of CORDURA® 1000, Inner air cell of tear-proof polyurethane, radio frequency welded easily replaceable, Volume: 40 liters, Lift: 328 N (33,50 kg), Corrugated group with inox elements, CE certified according to Norms EN250 and EN1809

M8 SCREW S.S. 25 MM

Stainless steel M8 screw and 25mm long. To attach the single tank adapter to the back plate.

KIDDO WING 12 L RED

Lightweight ring model wing for juniors, volume 12 litres. Double-shell construction but the cover is made of lighter material Cordura 1000 red colour. Inflator end-piece is SHARK which is more suitable for smaller hands, softer to press the buttons

DIR TECHNICAL HARNESS + SHOULDER PADS

TDS DIR Harness Scuba Diving Harnais: Technical harness for mounting on back plate (not included), with all necessary components included for a basic DIR configuration. The set is sold disassembled for the diver to assemble on his plate with his personal settings and preferences.

RING 14 WING

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

SOFT CONFORT TECHNICAL HARNESS

TDS Confort Plus Techncial Scuba Diving Harnais: Technical harness for mounting on back plate (not included) with adjustable and removable shoulder straps and all additional components. The set is sold disassembled so that the diver can mount it on his plate adapting it to his measurements and configuration preferences.

RING 14 WING RED

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

COMFORT TECHNICAL HARNESS

Technical harness for back plate mounting with all necessary components included and fully adjustable. Mounting and dismounting the back plate is very versatile, as it is fixed with screws of the twin cylinders themselves

RING 17 WING

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 - 18 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

BASIC COMPLETE HARNESS + KNIVE

Complete set contains of: PA harness with grommet, pocket with knife, crotch strap with 1 integrated D-ring and belt stopper, 1x stainless-steel D-ring, 3x stainless-steel D-ring bend, 6x stainless-steel stoppers, stainless-steel buckle, 5 narrow and 1 wide bungees

COMPLETE ADJUSTABLE HARNESS + KNIFE

Complete set contains of: PA harness with grommet with integrated: 2x adjustable stainless-steel buckles, 2x stainless-steel D-ring bend and 2x stainless-steel stoppers, 4 narrow and 1 wide bungees

copy of COMPLETE ADJUSTABLE HARNESS + KNIFE

Complete set contains of: PA harness with grommet with integrated: 2x adjustable stainless-steel buckles, 2x stainless-steel D-ring bend and 2x stainless-steel stoppers, 4 narrow and 1 wide bungees

RING 17 WING RED

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 - 18 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

BASIC HARNESS

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver

RING 20 WING

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 15 - 20 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

BASIC DIR HARNESS

This basic harness uses 25 feet of 2 inch nylon webbing material, 3 stainless steel D-rings with weight stops are included. Two at chest level and one on the waist. Easily repositioned for optimal configuration with an OMS Stainless Steel buckle. A 2 inch sewn crotch strap with a 2 inch Scooter “D” ring is also included. This harness is available to be installed on a diver’s backplate or on the OMS Aluminum or Stainless Steel backplates. Divers that prefer the simplest, most utilitarian harness generally choose this configuration. Available as a Kit or installed on OMS Backplates